3DPS logo
3DPS Europe
Service and development
HUEN
News

News / article

← Back to news Back to homepage
3devo Filament Maker X10 Targets Up to 1.5 kg of Custom Filament per Hour
2026. 09. 09.
14

3devo Filament Maker X10 Targets Up to 1.5 kg of Custom Filament per Hour

1 min read

Dutch manufacturer 3devo has introduced the Filament Maker X10, targeting the gap between laboratory development and small-scale filament production. The company says the system can produce up to 1.5 kg of filament per hour.

Key details

  • The machine joins the existing Filament Maker Two as a higher-throughput option.
  • Claimed production rate is up to 1.5 kg per hour.
  • Target users include universities, materials labs and smaller filament manufacturers.
  • Combined with 3devo shredding equipment, it can form part of a local recycling workflow.

Why it matters

Making filament in-house is not only about cost. It can be especially useful when developing filled materials, recycled polymers or small-batch formulations where control over the full material workflow matters.

Source and further information

This article is a summary based on publicly available source material. Read the original here: 3DPrint.com.



3DEvo

#3devo #FilamentMakerX10 #FilamentExtrusion #FilamentMaking #3DPrinting #Recycling #PlasticRecycling #MaterialDevelopment #CircularEconomy #FDM #3DNyomtatas #3DPS
Related articles
Stratasys–Bambu Lab: $27.6 Million Jury Verdict
2026. 09. 19.
290

Stratasys–Bambu Lab: $27.6 Million Jury Verdict

The September 17 US jury verdict concerns four patents. We examine what 3D-printing technologies the claims actually cover and what the verdict may mean for Bambu Lab and the desktop FDM market.

Archive

Earlier news

43 earlier article(s)
CALIBRA – A Free Measurement Equipment Management System Is Under Development
2026. 08. 11.
11

CALIBRA – A Free Measurement Equipment Management System Is Under Development

CALIBRA – A Free Measurement Equipment Management System Is Under Development A new in-house developed web application is joining the growing collection of 3DPS projects. CALIBRA is being developed as a modern, transparent and expandable measurement equipment and calibration management system. Development has progressed rapidly from the original concept to an already functioning web application, with the foundations of company management, equipment tracking, external partner management and auditing now in place.

Read
Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions
2026. 08. 04.
4

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

Read
Parkside Multi Charger – New Development Milestone
2026. 08. 02.
12

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

Read
Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard
2026. 07. 27.
2

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

Anycubic Kobra 3 Toolhead Project – Another Milestone: Successful Firmware Backup and Preparing for a CAN-Based Toolboard Today marked another major milestone in the Anycubic Kobra 3 Toolhead project. Our objective is not to modify or preserve the original firmware. Instead, we are developing a completely custom firmware that will transform the factory controller board into a Klipper-compatible CAN Tool MCU with only minimal hardware modifications.

Read
Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2
2026. 07. 26.
3

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project #2

Another Milestone Reached in the Anycubic Kobra 3 Toolhead Project The Anycubic Kobra 3 Toolhead reverse engineering project has reached another important milestone. Recent work has shifted beyond simply identifying components toward building a comprehensive and structured hardware documentation system that will serve as the foundation for all future development.

Read
Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed
2026. 07. 26.
3

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed

Anycubic Kobra 3 Toolhead Project – First Hardware Documentation Milestone Completed The reverse engineering project has reached another important milestone. Our recent work has focused not only on identifying individual components but also on building a structured hardware documentation system that will serve as the foundation for mapping the entire electronics assembly.

Read
„DO NOT TOUCH.” 😅
2026. 05. 12.
8

„DO NOT TOUCH.” 😅

There’s that legendary sticker on every engineering project that says: “DO NOT TOUCH.” 😅 But seriously… then HOW are we supposed to take it apart?!

Read
Bambu Lab A1 and A1 Mini – Factory First Layer Issues
2026. 05. 12.
15

Bambu Lab A1 and A1 Mini – Factory First Layer Issues

Bambu Lab A1 and A1 Mini – Factory First Layer Issues Several users of the Bambu Lab A1 and Bambu Lab A1 Mini printers have reported strange first layer issues that at first seem like slicer or filament problems, but are often actually caused by mechanical issues.

Read