News

News / article

Software / AI

← Back to news Back to homepage

2026. 09. 28.

Backflip: Engineering Drawings to Editable CAD Models

1 min read

The Drawing to CAD tool aims to turn legacy 2D drawings into editable parametric models.

The problem

Replacement-part manufacturing often starts from legacy 2D documentation, making 3D reconstruction time-consuming.

Beyond STL

Editable CAD features matter because they enable dimensional changes and manufacturability checks.

Limitations

AI-generated geometry must be checked by an engineer for critical parts.

Sources

TCT Magazine

2026. 10. 24.

3D Print Rig: Open-Source Browser Configurator for DIY Printers

3D Print Rig brings PC-style component selection to DIY printers with a browser-based 3D preview. Users can compare toolheads and mechanical options, but physical compatibility still needs verification.

2026. 10. 14.

UpNano 3DAR Adds Dynamic Three-Axis Voxel Control to 2PP Printing

UpNano's new 3D Adaptive Resolution technology dynamically adjusts voxel shape and size along all three spatial axes during two-photon polymerization printing, targeting high-quality micro-optics and photonics parts.

2026. 10. 14.

Unlayered 3D: A Desktop Five-Axis Printer and Non-Planar Slicing

Unlayered 3D is developing a five-axis desktop 3D printer and an OrcaSlicer-based non-planar slicer to reduce support requirements for complex geometries.

2026. 10. 14.

Artec Twins Targets Massive 3D Datasets for Digital Twins

Artec 3D has introduced Artec Twins, a software platform that combines point clouds, polygon meshes and Gaussian splatting for large-scale digitization and digital-twin workflows.

Earlier news

96 earlier article(s)

New printers

Lightmake L4: Four Fully Independent Toolheads in a Kickstarter Printer

The Lightmake L4 combines four independent toolheads with a linear-motor motion system to reduce multi-material waste and cycle time.

2026. 10. 05.

Read

New materials

KEXCELLED Raises Nearly RMB 100 Million for Chinese 3D Printing Materials

Suzhou-based Nuosibeirui, owner of the KEXCELLED brand, has closed a new funding round while expanding industrial filaments, photopolymer resins and custom material development.

2026. 10. 05.

Read

New printers

QIDI Smart 5: a compact CoreXY revealed by FCC filings

FCC documents reveal a 180×180×180 mm QIDI Smart 5 for PLA/PETG, with a claimed maximum speed of 600 mm/s.

2026. 10. 04.

Read

Industrial applications

China Pushes Green-Laser Copper 3D Printing into Batch Production

With its new XH-M350G-2HR, Xihe Additive is moving beyond demonstrations: copper cooling components for AI servers and power electronics are entering batch-production applications.

2026. 10. 03.

Read

New printers

Stratasys F870: One-Meter Industrial FDM Already in Toyota and Rivian Workflows

Stratasys’ new F870 combines a 1000 × 610 × 610 mm heated build chamber, Nylon 12CF support and a focus on production tooling, fixtures and factory aids.

2026. 10. 03.

Read

New materials

Prusament PLA Lightweight: foaming PLA for lightweight parts

Prusa says its new foaming PLA can produce prints up to 65% lighter, targeting RC models, drones and other weight-sensitive parts.

2026. 10. 03.

Read

New materials

KLS Martin and Lithoz: nearly 500 patient-specific bioceramic implants

Patient-specific LithaBone TCP implants made with Lithoz LCM technology are now a standard ordering option on KLS Martin’s IPS Gate platform.

2026. 10. 02.

Read

Industrial applications

Impossible Objects: $40 million to scale CBAM industrial manufacturing

Impossible Objects raised $40 million in Series B funding to scale its composite-based CBAM manufacturing technology.

2026. 10. 02.

Read

New materials

Tesseract: linear motors could replace belt drives in 3D printers

Dutch startup Tesseract Technologies is developing a linear-motor and closed-loop control system, with a commercial launch planned for Q1 2027.

2026. 10. 01.

Read

Technology

Commodore 64 Ultimate Returns: A Retro Legend, Not a 3D-Printed One

Commodore.net has officially relaunched its legendary home computer as the Commodore 64 Ultimate, rebuilding the classic machine on modern FPGA hardware. We cover it here as a curiosity: it has no direct 3D printing angle, since the case is produced with classic injection molding using the original 1986 tooling, not 3D printing.

2026. 10. 01.

Read